1000W in Hydroponics HPS/MH Plants Growing Light Electronic Ballast approved by FCC certificates

1000W in Hydroponics HPS/MH Plants Growing Lighting Electonic Ballast approved by FCC certificates


-Multi-Wattage Capabilites: Helius Boost,1000w,750w,600w
- Ignition control:Lights will ignite sequentially to completely balance the electrical draw& avoid tripping breakers

-Special Ignition Control Technology
-Full circuit protection

Product name

Helius miniature 1000W Electronic Ballast, 120/240V (HPS/MH) Dimmable

Application: Used in Hydroponics as Grow light power supply

Model No.     JY-1000JY-1000JY-1000
Fanwithout Fanwithout Fanwithout Fan
Main Input Voltage


input Voltage90V~260V
Input Power1080W1080W1080W
Output Power1000W1000W1000W
Input Current9.01A/4.34A5.74A/2.72A3.7A/1.84A
Lamp TypeHigh Pressure Sodium /Metal Halide
Input Frequency50Hz~60Hz
Ignition Voltage≥3.5kV
Power Factor≥0.99
Environment Temp.–20°C~50°C
Ta 30°C30°C 30°C
Tc 70°C70°C 70°C
Distance from Lamp15m
Dimming Range600W/750W/1000W/Helius Boost
Saving Energy   20%~30%
Designed life for ballast   6 Years
Factory Warranty   3 Years
ProtectionFull circuit protection for Hot Start, Short Circuit , Opening Circuit,

ignition failure, over/low voltage, overflow current.

Dimension (L*W*H) mm465*247*150465*247*150465*247*150
Net Weight5.4KG5.4KG5.4KG

1 Wide Range Current & Voltage , Accepts 120v or 240v
2 Special Ignition Control Technology
3 Full circuit protection
4 Soft start technology
5 Re-Strike of hot lamps
6.100% Professional Aging testing for high quality

For all ballasts, we should do aging testing twice. The first time is before pouring resin, it will be 12 hours. After resin, again we should do the second aging testing, it will be 12 hours too.

During the aging testing time, every half an hour the workers will make ON/OFF testing, every time they will make 10 times ON/OFF testing to check the surge to the ballasts.