Double ended 1000W 120v240v HPSMH digital ballast with fan

Double ended 1000W 120v/240v HPS/MH digital ballast with fan

1. What is the difference between Raynen's ballast with others in the market?

Our ballast components all imported from the world famous brand:

1.1 Capacitor,we are using Sam Young,who is doing OEM for NCC (Nippon Chemi-Con);

1.2 Transistor,we are using Infenion or Fairchild according to different power needs;

1.3 Diode,brand of ST (SGS-THOMSON Microelectronics)


FanWith Fan
Main Input Voltage120V/240V
Input Voltage90V~260V
Input Power1080W

Output Power

Input Current9.01A/4.34A
Lamp TypeDouble-ended&Single-ended

High Pressure Sodium /Metal Halide Lamps

Input Frequency50Hz~60Hz
Ignition Voltage≥3.5kV
Power Factor≥0.99
Output THD≤15%
Environment Temp.–20°C~50°C
Distance from Lamp15m
Dimming Range600W/750W/1000W

/Helius Boost

Saving Energy   20%~30%
Designed life for ballast   6 Years
Factory Warranty   3 Years
ProtectionFull circuit protection for Hot Start, Short Circuit ,

Opening Circuit, Ignition Failure, Over/Low Voltage,Overflow Current.

Dimension (L*W*H) mm470*278*356
Net Weight 18KG


3.1.Wide Range Current &Voltage Accepts120V or 240V
3.2.Special Ignition Control Technology
3.3.Full Circuit Protection
3.4.Soft Start Technology
3.5. Re-Strike of hot lamps

Quality Control

100% Professional Aging testing for high quality

For all ballasts, Jayo do the aging testing twice. The first time is before pouring resin, it will be 12hrs. After resin,again we do the second aging testing for 12 hours too. During the aging test, every half hour our workers make ON/OFF testing 10 times to check the surge of the ballasts.


Electronic ballasts will be protected by foam, then will be packed in a firm black or white or

customized beautiful Box. For 1000W ballasts, usually 2pcs in a Carton, All the cartons will be protected by strapping.